Installation day is the shortest part of an impact window project and the part homeowners worry about most. Here is how a typical day runs with Elevate Impact Windows, what to do beforehand, and what the house looks like when the crew leaves.
Before the crew arrives
- Clear furniture, blinds, curtains and wall items about three feet back from each opening
- Remove anything fragile from windowsills and nearby shelves
- Make a path from the driveway to each opening and secure pets in a closed room
- Confirm the permit is posted; we handle this, but it must be visible for the inspector
- Plan for noise and dust in the rooms being worked on; other rooms stay usable
A typical day
- Arrival and walkthrough. The crew lead confirms each opening against the order and the approved drawings.
- Protection. Floors and furniture near each opening are covered.
- Removal. The old window is cut free and removed down to the rough opening. The opening is inspected for damage.
- Preparation. The opening is cleaned, and any repair to the buck or block is made. A sill pan or sealant bed is set.
- Setting the unit. The new window is set, shimmed square and level, and anchored to the drawings for your wall type.
- Sealing. The perimeter is sealed inside and out against wind-driven rain.
- Finish. Stucco or trim is patched, interior finish is repaired, and the sash is adjusted and tested.
- Cleanup. Old windows are hauled away and each room is swept and wiped down.
How long it takes
A typical single-family home with 10 to 20 openings takes one to three days. Sliding glass doors take longer per opening than windows. Second-story work, stucco repair and elevated homes in the Keys add time. We give you a schedule before the crew arrives and update you if anything changes.
After installation
- Keep the windows closed and locked for the first day so sealant cures undisturbed
- Painting of patched stucco or trim is completed once patches cure, if included in your contract
- We schedule the final inspection with the county or city and meet the inspector
- You receive the closed permit, product approvals and warranty registration
- Schedule a wind mitigation inspection to update your insurance credit
The permit process, step by step and our warranty.
Frequently asked questions
Do I need to be home during installation?
An adult should be present at the start to walk through the openings and at the end for the final walkthrough. You do not need to stay all day.
Will my house be exposed overnight?
No. Each opening is removed and replaced the same day, and the crew does not open more openings than it can close before leaving.
Is there a lot of dust?
Some, in the rooms being worked on. Floors and furniture near each opening are covered, and each room is cleaned before the crew leaves.
What if the crew finds rot or damage in the opening?
The crew lead shows you the condition and explains the repair before proceeding. Minor repairs are common in older homes.
When can I open the new windows?
After the first day, once the sealant has cured.

